after update all the link pages heve gone


Recommended Posts

9 hours ago, יהודה יל said:

hello

 

i try to do so

the copmuter dont let me

it is said im not the adminstor 

it is my home comp - so i dont know y he think im not the administor

tnx

Hello

I've made a discuss with our developer team. And if it convenient we invite you have a remote via teamviewer. It would be great if you can help us solve this issue.

And which country are you from? We can make an appointment for this issue. Thanks!

Link to post
Share on other sites
9 hours ago, יהודה יל said:

hello

 

i try to do so

the copmuter dont let me

it is said im not the adminstor 

it is my home comp - so i dont know y he think im not the administor

tnx

Here you have a solution to your problem :)

Notepad starts by default without administrative rights. Therefore, you must follow these steps:

Step 1. Open your Windows start menu, search for the notepad application and then right click the notepad icon.

Step 2. Choose “Run as administrator” and then, while inside notepad, browse to folder (/windows/system32/drivers/etc) that contains the hosts file.

You can now edit and save that file in the same folder without any issues.

Link to post
Share on other sites

i heve done as glileusz sey

thet is the hosts know


"

Copyright (c) 1993-2009 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
#      102.54.94.97     rhino.acme.com          # source server
#       38.25.63.10     x.acme.com              # x client host

# localhost name resolution is handled within DNS itself.
#    127.0.0.1       localhost
#    ::1             localhost
pc-newtab.maxthonimg.com 60.206.195.123"

 

Link to post
Share on other sites
7 hours ago, יהודה יל said:

pc-newtab.maxthonimg.com 60.206.195.123" 

Why do you have quotation marks at the end " ? This should not be like that.

And as he writes: 

"The IP address should be placed in the first column followed by the corresponding host name. The IP address and the host name should be separated by at least one space"

So save it like that:  60.206.195.123    pc-newtab.maxthonimg.com

Link to post
Share on other sites

TNX  GALILEUSZ

i jast made copy-fasta  from the answer

i put 2 space

now it is 

 

# Copyright (c) 1993-2009 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
#      102.54.94.97     rhino.acme.com          # source server
#       38.25.63.10     x.acme.com              # x client host

# localhost name resolution is handled within DNS itself.
#    127.0.0.1       localhost
#    ::1             localhost
pc-newtab.maxthonimg.com   60.206.195.123

it is stil the same 
i didnt close the broser 
and didnt make restart

 

i close the maxtone

open it - it is still the same

Link to post
Share on other sites
8 hours ago, יהודה יל said:

ן heve made restart

it is the same

stil need help

tnx

Have you changed the host like following image? Still not work? If it is, please download a teamviewer and we can make an appointment for remote.

host 替换(显示白页).jpg

Link to post
Share on other sites

hello bugsir006

 

i made the  host changed 

olso put  separated by at least one space - as gli sey

i heve  teamviewer 12 [but need expline to use it]  

 can u bring back my link thet i put ther?

this is the hosts after chang:

 

# Copyright (c) 1993-2009 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
#      102.54.94.97     rhino.acme.com          # source server
#       38.25.63.10     x.acme.com              # x client host

# localhost name resolution is handled within DNS itself.
#    127.0.0.1       localhost
#    ::1             localhost
pc-newtab.maxthonimg.com   60.206.195.123

tnx very mach


 

Link to post
Share on other sites
32 minutes ago, יהודה יל said:

pc-newtab.maxthonimg.com   60.206.195.123

Make sure the numbers (ip address) are before the words (host name).

The above should be:

60.206.195.123          pc-newtab.maxthonimg.com

Link to post
Share on other sites
2 hours ago, יהודה יל said:

bugsir screen is not like thet

Bugsir's is wrong or is different for some other reason. The examples 5 lines above your addition show how the correct format for the file should be.

There's no guarantee that bugsir's suggestion was going to help, at least try the correct format and see if does anything.

Also, to check that the hosts file change is working add:

127.0.01   www.maxthon.com

Restart Maxthon and goto www.maxthon.com. You should get an error. If not, then the changes to the file aren't working. Delete the line once tested.

You can also try adding www.maxthon.com     127.0.0.1 to confirm that adding it the wrong way doesn't work.

Link to post
Share on other sites
19 hours ago, יהודה יל said:

#
# For example:
#
#      102.54.94.97     rhino.acme.com          # source server
#       38.25.63.10     x.acme.com              # x client host

# localhost name resolution is handled within DNS itself.
#    127.0.0.1       localhost
#    ::1             localhost
pc-newtab.maxthonimg.com   60.206.195.123

tnx very mach


 

1.Open the host file

找到host文件.png

2.open that file 

3.Add a new line on the original basis(be sure a new line) and the new line content should be: pc-newtab.maxthonimg.com 60.206.195.123 (be sure there only one blank between pc-newtab.maxthonimg.com and 60.206.195.123)

 

Link to post
Share on other sites

hello bugsir

i made onli 1 blank between pc-newtab.maxthonimg.com and 60.206.195.123

now it is:


#      102.54.94.97     rhino.acme.com          # source server
#       38.25.63.10     x.acme.com              # x client host

# localhost name resolution is handled within DNS itself.
#    127.0.0.1       localhost
#    ::1             localhost
pc-newtab.maxthonimg.com 60.206.195.123

------

stil the same problem

but ther is litel diferernt: know all the page blank [dont heve the smal google bar sherch up on the page]

still need help

tnx

 

Link to post
Share on other sites
2 hours ago, יהודה יל said:

still need help

You've been given help 3 times by 2 different users and have dismissed it because, for whatever reason you deem BugSir006's information more relevant than ours.

This is despite the information being clear and concise, and explicitly detailed in the file you are modifying. If you don't want to do the test, that's fine - just say so.

I apologise if this post comes off as a little blunt, but there is nothing more annoying than people asking for help, then completely ignoring it without giving a valid reason why, or even trying what was requested.

While I don't know if what was suggested is going to fix anything, I do know that you won't get anywhere following bugsirs advice in this situation.

MaxthonSnap20171114225837.png

Link to post
Share on other sites
47 minutes ago, -ody- said:

maybe it's the reason why it does not work ?

Maybe, but the test that bugsir006 posted was never a guaranteed fix - just a check/test.

Which is why i posted above how to check that the changes to the HOSTS file are actually working... but you know, my posts seem to be hidden from users...

Link to post
Share on other sites

Hebrew language? Please check whether the host is added successfully:

1.Tap Win+r

2.enter cmd and confirm

打开cmd查看是否绑定成功.png

3.Check the file appear or not

enter ping pc-newtab.maxthonimg.com

and check the host added successful or not(whether appear the corresponding domain name

查看是否生效.png

 

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.