×

Give a tip

moving from 4.4 -> 4.9 with 'quick access' problem


Recommended Posts

Was using the old and now trying the new however I have an issue with the 'quick access' website snapshots of the tabs, everything else looks good so far.  In version 4.4 I have certain pictures for the various websites that works great because everyone knows just by the look of the picture.

I installed 4.9 both ways, overtop of 4.4 and also clean of 4.9.  When installed both ways the 'quick access' page does list all of the website tabs however it downloads new website screen shot pictures on both install methods.  I want to keep the old website screen shot pictures I already have from 4.4. 

I've read about copy/past over the thumb.dat.  I've tried that and no result to get back the old screen shot pictures I've had in 4.4.

While 4.4 is installed I did a passport update so that I can transfer over with a clean 4.9 install.  After the 4.9 clean install the sync again does show the websites, all are there however it always gets new pictures.

 

What can I do to archive the old 4.4 screen shot website pictures and re-add them to 4.9?

 

thanks a bunch

Tip   Give
Link to comment
Share on other sites

7 hours ago, ckmullin said:

Was using the old and now trying the new however I have an issue with the 'quick access' website snapshots of the tabs, everything else looks good so far.  In version 4.4 I have certain pictures for the various websites that works great because everyone knows just by the look of the picture.

I installed 4.9 both ways, overtop of 4.4 and also clean of 4.9.  When installed both ways the 'quick access' page does list all of the website tabs however it downloads new website screen shot pictures on both install methods.  I want to keep the old website screen shot pictures I already have from 4.4. 

I've read about copy/past over the thumb.dat.  I've tried that and no result to get back the old screen shot pictures I've had in 4.4.

While 4.4 is installed I did a passport update so that I can transfer over with a clean 4.9 install.  After the 4.9 clean install the sync again does show the websites, all are there however it always gets new pictures.

 

What can I do to archive the old 4.4 screen shot website pictures and re-add them to 4.9?

 

thanks a bunch

My experience with 4.4.8.2000 (and earlier) and 4.9.3.300 (and earlier) is that website images routinnely update to a screen shot of the last visit.  I don't know and have never thought to try locking them down.  Mabe there's a way, but Id expect undesrieable effects like not being asbe to add a new site, not beng able to sync, etc.

                    <<SL>>

Tip   Give
Link to comment
Share on other sites

For me acutally the pictures have always stayed the same after I add a particular website even after years of updating maxthon though the various builds.  I've never manually updated/refreshed to get a new picture.  It for me has also never updated the picture by itself either.  Just trying to figure out what is different that this update is so different than everything else in the past as those pictures have always 'ported over' just fine.  Yes, a different type of platform but would think that would have been an issue.

update:

So actually looking very close at the 'quick access' website snapshot pictures I can make out a date of time.  The pictures are of 4 months ago which I find very interesting.  I've updated/reinstalled 4.9 now a number of times and everytime the 'quick access' pictures are of that time stamp, 4 months ago.

If it can keep a picture static as it is, I just want to put back the originals that I had with version 4.4 and numerous builds before it.  I've got no clue and trying to figure out why it seems to me that randomly it decided to pick snapshots of 4 months ago than what was used in the builds before.

Could it be a feature that we can choose our own pictures for the 'quick access' website snapshot tabs?

What specific file deals with the "quick access" screen shot website pictures?

 

Thanks again!

Tip   Give
Link to comment
Share on other sites

Hi,
the new MX 4.9.3.200 have problem on the QuickAccess.
more website cannot snap for the QuickAccess.

some web cannot access.(I can access ok by MX4.9.3.200, but QuickAccess)(http://www.electronics-tutorials.ws/)

some web caanot snap. (always white icon.) (http://zh.cn.nikkei.com/, http://www.routerclub.com/portal.php)

some web have pop notice, and the snap will be included pop (the Pop notice is white.) (http://www.wisland.cc/index.php)

 

otherwise, the ABP doesn't work well on QuickAccess snap state. (4.jpg)

 

Could you fix it?
PS:
I measure the I don't have any anti-virus or virus, no proxy.

Thanks
Wisely 

2.jpg

3.jpg

1.jpg

4.jpg

Tip   Give
Link to comment
Share on other sites

3 hours ago, Wisely said:

Hi,
the new MX 4.9.3.200 have problem on the QuickAccess.
more website cannot snap for the QuickAccess.

some web cannot access.(I can access ok by MX4.9.3.200, but QuickAccess)(http://www.electronics-tutorials.ws/)

some web caanot snap. (always white icon.) (http://zh.cn.nikkei.com/, http://www.routerclub.com/portal.php)

some web have pop notice, and the snap will be included pop (the Pop notice is white.) (http://www.wisland.cc/index.php)

otherwise, the ABP doesn't work well on QuickAccess snap state. (4.jpg)

 

merged

sigmax2.png

Tip   Give
Link to comment
Share on other sites

On 2016/5/14 at 1:30 PM, ckmullin said:

Was using the old and now trying the new however I have an issue with the 'quick access' website snapshots of the tabs, everything else looks good so far.  In version 4.4 I have certain pictures for the various websites that works great because everyone knows just by the look of the picture.

I installed 4.9 both ways, overtop of 4.4 and also clean of 4.9.  When installed both ways the 'quick access' page does list all of the website tabs however it downloads new website screen shot pictures on both install methods.  I want to keep the old website screen shot pictures I already have from 4.4. 

I've read about copy/past over the thumb.dat.  I've tried that and no result to get back the old screen shot pictures I've had in 4.4.

While 4.4 is installed I did a passport update so that I can transfer over with a clean 4.9 install.  After the 4.9 clean install the sync again does show the websites, all are there however it always gets new pictures.

What can I do to archive the old 4.4 screen shot website pictures and re-add them to 4.9?

thanks a bunch

Ckmullin, Unfortunately, we can't re-add 4.4 screen shot website pictures in to 4.9 quick access temporarily, because now there is no features of change pictures in "Quich Access" Function.

I will send this requirements to design team. hope it could be added in the future~

Tip   Give
Link to comment
Share on other sites

8 hours ago, Wisely said:

Hi,
the new MX 4.9.3.200 have problem on the QuickAccess.
more website cannot snap for the QuickAccess.

some web cannot access.(I can access ok by MX4.9.3.200, but QuickAccess)(http://www.electronics-tutorials.ws/)

some web caanot snap. (always white icon.) (http://zh.cn.nikkei.com/, http://www.routerclub.com/portal.php)

some web have pop notice, and the snap will be included pop (the Pop notice is white.) (http://www.wisland.cc/index.php)

Hi,Wisely. Could you tell me your computer system? then, I can let our test team to have a test, because those link all work well on my computer. My OS is Win10.

8 hours ago, Wisely said:

otherwise, the ABP doesn't work well on QuickAccess snap state. (4.jpg)

4.jpg

Besides, could you provide the web link of this problem?

Thanks your cooperation and looking forward to your reply~

Tip   Give
Link to comment
Share on other sites

44 minutes ago, BugMiss006 said:

Hi,Wisely. Could you tell me your computer system? then, I can let our test team to have a test, because those link all work well on my computer. My OS is Win10.

Besides, could you provide the web link of this problem?

Thanks your cooperation and looking forward to your reply~

Problems with broken thumbs in New Tab has been reported by me many times for last couple of months (of course without any response)!

See here please : http://forum.maxthon.com/index.php?/topic/19136-mx492300/#comment-99111

http://forum.maxthon.com/index.php?/topic/19377-changelog-for-maxthon-test-version-492500/#comment-99956

http://forum.maxthon.com/index.php?/topic/18866-changelog-for-maxthon-test-version-491100/#comment-97805

and there are more posts about this issue...:wacko:

 

 

Tip   Give
Link to comment
Share on other sites

14 hours ago, m▲gg said:

Problems with broken thumbs in New Tab has been reported by me many times for last couple of months (of course without any response)!

See here please : http://forum.maxthon.com/index.php?/topic/19136-mx492300/#comment-99111

http://forum.maxthon.com/index.php?/topic/19377-changelog-for-maxthon-test-version-492500/#comment-99956

http://forum.maxthon.com/index.php?/topic/18866-changelog-for-maxthon-test-version-491100/#comment-97805

and there are more posts about this issue...:wacko:

Some got follow-ups; some seem be fixed in new version; some confirmed as bugs.

I just replied in original post. Please have a look~

Thanks for this feedback and follow-ups~

Tip   Give
Link to comment
Share on other sites

18 hours ago, BugMiss006 said:

Hi,Wisely. Could you tell me your computer system? then, I can let our test team to have a test, because those link all work well on my computer. My OS is Win10.

Besides, could you provide the web link of this problem?

Thanks your cooperation and looking forward to your reply~

Hi BugMiss006

the web :http://www.slime.com.tw/

Please help to check , because not only this web site.

Also my system is Win7-64bit

 

 

Tip   Give
Link to comment
Share on other sites

I tried to change the settings from "background" ( website title) to "screenshot" : 3 remarks :

  • it takes a very long time to update
  • several sites show as "down" ("unable to connect") although they work fine (no issue with "background" setting)

http://www.ta-meteo.fr/lamalou-les-bains

http://www.zone-telechargement.com/series-vostfr.html

  • I tried to return to previous setting (title) : earlyaccess is frozen until all screencaptures are loaded : settings don't hide, I can't close the tab

early2.pngearly2.png

sigmax2.png

Tip   Give
Link to comment
Share on other sites

22 hours ago, -ody- said:

 

  • several sites show as "down" ("unable to connect") although they work fine (no issue with "background" setting)

http://www.ta-meteo.fr/lamalou-les-bains

http://www.zone-telechargement.com/series-vostfr.html

means can't add those two website into Quick Access or no QA screenshot picture

could you give me your computer system and browser version? and I can do a more exact testing.

Thanks and looking forward to reply~

Tip   Give
Link to comment
Share on other sites

9 hours ago, BugMiss006 said:

means can't add those two website into Quick Access or no QA screenshot picture

could you give me your computer system and browser version? and I can do a more exact testing.

Thanks and looking forward to reply~

windows 10, max 4.9.3.300

if you refer to my screen capture, you can see that some websites are shown as "down" although they're not.

(and there are several sites I can't add to EA from open tabs list  : I have to manually enter the url)

sigmax2.png

Tip   Give
Link to comment
Share on other sites

19 hours ago, BugMiss006 said:

strange...just test it... It display well in v4.9.3.200, Win7x64...

 

QQ图片20160518143828.jpg

 

The normally is ok, but not ok in QA

 

18 hours ago, BugMiss006 said:

means can't add those two website into Quick Access or no QA screenshot picture

could you give me your computer system and browser version? and I can do a more exact testing.

Thanks and looking forward to reply~

Yes, more web cannot display on QA. and it's no connection, even directly access internet. (the web is ok, but not ok on QA)

 

Tip   Give
Link to comment
Share on other sites

17 hours ago, -ody- said:

windows 10, max 4.9.3.300

if you refer to my screen capture, you can see that some websites are shown as "down" although they're not.

(and there are several sites I can't add to EA from open tabs list  : I have to manually enter the url)

Mine is win10 and max4.9.3.300, too...it works well in my computer...

oh, remind it, we update again for 4.9.3.300 in FTP. Please download it again and have a try.

QQ截图20160519113220.jpg

Tip   Give
Link to comment
Share on other sites

1 hour ago, BugMiss006 said:

Mine is win10 and max4.9.3.300, too...it works well in my computer...

oh, remind it, we update again for 4.9.3.300 in FTP. Please download it again and have a try.

 

I can see an "error 520"  on your screenshot.. not quite what I get but similar (site seems to be down but when I click the tile, it opens)

Sorry but I have to leave to work, won't be able to update until the end of the day.

sigmax2.png

Tip   Give
Link to comment
Share on other sites

4.9.3.400 clean install : several tiles are fixed ( some "down" sites work now, but not all of them), but now I lots several screenshots... look below

maxthon 4.9.3.300

ea.png

 

maxthon 4.9.3.400 

ea2.png

sigmax2.png

Tip   Give
Link to comment
Share on other sites

On 2016/5/19 at 11:38 AM, BugMiss006 said:

Mine is win10 and max4.9.3.300, too...it works well in my computer...

oh, remind it, we update again for 4.9.3.300 in FTP. Please download it again and have a try.

QQ截图20160519113220.jpg

I think you just use 2 web on QA, but we are migration from old version.

Basically, we have many web on QA. for the example, I used 8 page with around ~80 web on QA.

PS: don't want us to try reduce the web.

And my original issue is ABP is not work well on QA. NOT ABP work on normally browsing. 

1.jpg

2.jpg

Tip   Give
Link to comment
Share on other sites

On 2016/5/19 at 10:28 AM, Wisely said:

 

The normally is ok, but not ok in QA

sorry, looked wrong. :( 

we just test it, the QA picture actually looks like your screenshot. but this's not a bug...

It's not  ABP problem. we disabled ABP, the screenshot is same.

Tester told me "This webpage AD is a delay AD. At the moment of the QA system taking the screenshot, the ADs has not displayed. So a piece of blank in screenshot."

Also thanks your feedback~

39 minutes ago, Wisely said:

I think you just use 2 web on QA, but we are migration from old version.

Basically, we have many web on QA. for the example, I used 8 page with around ~80 web on QA.

1.jpg

Could you send me the others web link? and I think maybe others didn't due to same issue. I wanna verify this problem. 

Big thanks and looking forward to your response.

Tip   Give
Link to comment
Share on other sites

6 hours ago, BugMiss006 said:

sorry, looked wrong. :( 

we just test it, the QA picture actually looks like your screenshot. but this's not a bug...

It's not  ABP problem. we disabled ABP, the screenshot is same.

Tester told me "This webpage AD is a delay AD. At the moment of the QA system taking the screenshot, the ADs has not displayed. So a piece of blank in screenshot."

Also thanks your feedback~

Could you send me the others web link? and I think maybe others didn't due to same issue. I wanna verify this problem. 

Big thanks and looking forward to your response.

http://www.slime.com.tw/

http://www.wisland.cc/index.php

http://zh.cn.nikkei.com/

http://www.routerclub.com/portal.php

http://www.cheers.com.tw/

http://www.electronics-tutorials.ws/

http://www.researchmfg.com/

 

The list is issue web link on QA. Please help to check.

For the ADP on QA issue, The issue have other one, that it's When I already open the web page, and the QA get snap still different browsing page UI.

 

 

Tip   Give
Link to comment
Share on other sites

20 hours ago, Wisely said:

http://www.slime.com.tw/

http://www.wisland.cc/index.php

http://zh.cn.nikkei.com/

http://www.routerclub.com/portal.php

http://www.cheers.com.tw/

http://www.electronics-tutorials.ws/

http://www.researchmfg.com/

The list is issue web link on QA. Please help to check.

For the ADP on QA issue, The issue have other one, that it's When I already open the web page, and the QA get snap still different browsing page UI.

I have sent them to tester team. if they confirmed them or give other feedback, I will contact you ASAP.

Again thanks your feedback~

Tip   Give
Link to comment
Share on other sites

On all versions of 4.9 when added to the speed dial tab with the address "http://www.eldorado.ru/" Speed Dial is no longer responding, even when the program is restarted. Settings to display a snapshot of the site

Tip   Give
Link to comment
Share on other sites

1 hour ago, kdasoft said:

On all versions of 4.9 when added to the speed dial tab with the address "http://www.eldorado.ru/" Speed Dial is no longer responding, even when the program is restarted. Settings to display a snapshot of the site

merged !

sigmax2.png

Tip   Give
Link to comment
Share on other sites

2 hours ago, kdasoft said:

On all versions of 4.9 when added to the speed dial tab with the address "http://www.eldorado.ru/" Speed Dial is no longer responding, even when the program is restarted. Settings to display a snapshot of the site

Do not test this, it is almost impossible to fix, even by deleting appdata user  QA folder.

Tip   Give
Link to comment
Share on other sites

10 hours ago, kdasoft said:

On all versions of 4.9 when added to the speed dial tab with the address "http://www.eldorado.ru/" Speed Dial is no longer responding, even when the program is restarted. Settings to display a snapshot of the site

Hi, kdasoft. Sorry for this inconvenience. This problem has confirmed as a bug, we will fix it ASAP. Thanks for feedback.

Tip   Give
Link to comment
Share on other sites

On Tuesday, May 17, 2016 at 4:11 AM, BugMiss006 said:

Ckmullin, Unfortunately, we can't re-add 4.4 screen shot website pictures in to 4.9 quick access temporarily, because now there is no features of change pictures in "Quich Access" Function.

I will send this requirements to design team. hope it could be added in the future~

Thanks for passing it along.  I think it would be a good feature to allow people to use their own pictures for the tabs.

Tip   Give
Link to comment
Share on other sites

14 hours ago, kdasoft said:

The speed dial is not used filters and adblock, please correct the preparation of the site picture.380cba04e37ab8d7cd31e3f2784.jpg

 

Hello, Kdasoft. We will set up "General Discussion" Part as "read only" soon (at the end of May). This problem need more information to confirm and test process needs time.

For convenience of feedback and solving problem, it would better to create problem in new "Bug Tracker" Part: http://forum.maxthon.com/index.php?/bug-tracker/

For details, please look at here: http://forum.maxthon.com/index.php?/announcement/7-upgrading-for-general-discussion-section/

Thanks for your cooperation.:)

Tip   Give
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.