rfj Posted October 16, 2015 Report Share Posted October 16, 2015 HiI'm giving Maxthon a 2nd try now -as I actually love it! -the only browser I have found that sync my pc and win phone! I also enjoy the layout and the fact that I seem to be able to access all login services and media sites I need to visit!But it had a nasty habit of freezing though in a strange way -website letters sort of melted together and changed shape.. images stopped showing -and in the end it all froze -but I could close it with the X .. After restarting it worked fine again for quite a while before it happend again.. each time I was on the photopage Flickr I think -where I hang a lot ...I know with so little info you can't help much -but maybe you can give me a hint what to do if it happens again this time? ..I run Windows 10 -64b. -plenty of memory and so.. it have never happend with another browser. -and I tried every trouble shooting except uninstalling the adblock.. Ok, hope this new install will turn out fine ;) .. if so I will use it again on my phone too of course.Greetings from Norway (sorry if bad english)rfj Link to comment Share on other sites More sharing options...
rfj Posted October 17, 2015 Author Report Share Posted October 17, 2015 HiAs mentioned yesterday I had this crash problem that seem to occur in special when I visit the Flickr community, where I spend a lot of time.. But since I really like this browser! I wanted to give it another try.. But now it just happened again: see added screen dumps.As you see text mess up -then disappear -and it also effect other open tabs .. and I must close the browser and restart.Hope there is some good advice about this.. as it is hard to live with .. Link to comment Share on other sites More sharing options...
-ody- Posted October 17, 2015 Report Share Posted October 17, 2015 As mentioned yesterday I had this crash problemMx labs is only for Mx nitro. I merged your 2 posts it sometimes happens to me, with the latest version, randomly... could not find a way to reproduce it. Link to comment Share on other sites More sharing options...
No.1MaxthonFan Posted October 17, 2015 Report Share Posted October 17, 2015 HiAs mentioned yesterday I had this crash problem that seem to occur in special when I visit the Flickr community, where I spend a lot of time.. But since I really like this browser! I wanted to give it another try.. But now it just happened again: see added screen dumps.As you see text mess up -then disappear -and it also effect other open tabs .. and I must close the browser and restart.Hope there is some good advice about this.. as it is hard to live with ..What is your "Default Encoding" set to? Try Unicode (UTF8) and which version of Maxthon are you using? Windows 10 64-bit build 10525/Windows 10 Mobile build 10512 Link to comment Share on other sites More sharing options...
rfj Posted October 17, 2015 Author Report Share Posted October 17, 2015 What is your "Default Encoding" set to? Try Unicode (UTF8) and which version of Maxthon are you using?UTF8 is my default. Version is V.4.4.7.3000 Link to comment Share on other sites More sharing options...
-ody- Posted October 17, 2015 Report Share Posted October 17, 2015 UTF8 is my default. Version is V.4.4.7.3000same here, I have never encountered this issue with previous versions.. it sometimes happens here, on this forum, when I refresh a page for example, the display is all messed up, then the browser freezes and I have to close it. Link to comment Share on other sites More sharing options...
rfj Posted October 17, 2015 Author Report Share Posted October 17, 2015 same here, I have never encountered this issue with previous versions.. it sometimes happens here, on this forum, when I refresh a page for example, the display is all messed up, then the browser freezes and I have to close it.I'm sort of relieved that I'm not alone ) .. I'm sure the issue will be taken care of in some update soon .. good luck to the hard working staff. Link to comment Share on other sites More sharing options...
No.1MaxthonFan Posted October 17, 2015 Report Share Posted October 17, 2015 I'm sort of relieved that I'm not alone ) .. I'm sure the issue will be taken care of in some update soon .. good luck to the hard working staff.It is strange because I have been there several times (Flickr) and don't have the problem you both are seeing. Strange, to say the least as I'm using the same version as you both are on Windows 10 Insider Build 10549. Windows 10 64-bit build 10525/Windows 10 Mobile build 10512 Link to comment Share on other sites More sharing options...
7twenty Posted October 17, 2015 Report Share Posted October 17, 2015 Had it occur once that I recall, don't remember which site though.Flickr working as normal here.Try not logging into passport and see if it still happens. Link to comment Share on other sites More sharing options...
-ody- Posted October 18, 2015 Report Share Posted October 18, 2015 Try not logging into passport and see if it still happens.difficult as it happens very randomly, if I don't loggin and it does not happen within 3 days will not prove anything.maybe gpu acceleration ? I disable it (same difficulty as above but less inconvenience...) Link to comment Share on other sites More sharing options...
rfj Posted October 18, 2015 Author Report Share Posted October 18, 2015 Thanks for the tips guys -I also disabled gpu -and the adblock when in Flickr.. -and see if it helps.But please help an old man; what 'passport' ?.. Link to comment Share on other sites More sharing options...
-ody- Posted October 18, 2015 Report Share Posted October 18, 2015 Thanks for the tips guys -I also disabled gpu -and the adblock when in Flickr.. -and see if it helps.But please help an old man; what 'passport' ?.. passport is a connected account, allows you to sync your devices, and retrieve all your datas when you perform a clean install, when you use another computer, etc...you can create an account or connect by clicking your avatar top left of the browser Link to comment Share on other sites More sharing options...
rfj Posted October 18, 2015 Author Report Share Posted October 18, 2015 Ok, thanks! Link to comment Share on other sites More sharing options...
7twenty Posted October 18, 2015 Report Share Posted October 18, 2015 difficult as it happens very randomly, if I don't loggin and it does not happen within 3 days will not prove anything.They're the worst types of issues to try and solve. You put yourself out, but because it's so random you don't know if what you're trying is helping or that the issue just hasn't occurred.Probably a good idea to start with things like GPU accel first which would be much less annoying than losing all your customisation by testing without an account. Hopefully it can be found before having to resort to more drastic measures Link to comment Share on other sites More sharing options...
rfj Posted October 19, 2015 Author Report Share Posted October 19, 2015 HiI'm afraid the GPU disable did not help much either (see add) .. I look very much forward to an update soon, as I understood that this seem to be a bug in the latest one.. does anyone have an idea if there is an update in progress?..I thank you guys in this thread for your help and participation! Guess I will try to unplug the 'passport' now .. though that is the most important reason why I want to use Maxthon Link to comment Share on other sites More sharing options...
-ody- Posted October 19, 2015 Report Share Posted October 19, 2015 HiI'm afraid the GPU disable did not help much either (see add) .. I look very much forward to an update soon, as I understood that this seem to be a bug in the latest one.. does anyone have an idea if there is an update in progress?..I thank you guys in this thread for your help and participation! Guess I will try to unplug the 'passport' now .. though that is the most important reason why I want to use MaxthonThere will be an update, it's on test, but since it will be a major one, be patient ! Link to comment Share on other sites More sharing options...
rfj Posted October 19, 2015 Author Report Share Posted October 19, 2015 There will be an update, it's on test, but since it will be a major one, be patient ! I will! -thanks! Link to comment Share on other sites More sharing options...
-ody- Posted October 19, 2015 Report Share Posted October 19, 2015 a capture here on the forum 2 minutes agoscrolling initiated the bug, then I closed all tabs and reopened maxthon forum, bug was still there until I totally closed maxthon (no freeze this time, but I sometime have freezes too) another time here, scrolling again : https://www.invisionpower.com/features/spamI can reproduce it each time i go there, passport or not, ABP on or OFF, all extensions disabled, and the site does not work in retro, but it works fine in edgewhat else : I performed a clean install, no extension, no skin, same result. on maxthon forum, I can't find a way to reproduce it, on invision board site maxthon constantly bugs after 15 or 20 seconds while scrollingI'm under the impression that issue is caused by the video content Link to comment Share on other sites More sharing options...
rfj Posted October 19, 2015 Author Report Share Posted October 19, 2015 I tried the 'invision' link -and exactly the same happens to me!.. and in that site it happens right away! .. Also Flickr is slightly animated so I think you're right, it seem to be some bug that wakes up by some video / animation formats ..Again thanks for assist -ody- ! -I feel this is in good hands with you! .. I will be patient as I hope they make a good update.. and I'm sure you will give the good staff an extra push ... Link to comment Share on other sites More sharing options...
-ody- Posted October 19, 2015 Report Share Posted October 19, 2015 I tried the 'invision' link -and exactly the same happens to me!.. and in that site it happens right away! .. Also Flickr is slightly animated so I think you're right, it seem to be some bug that wakes up by some video / animation formats ..Again thanks for assist -ody- ! -I feel this is in good hands with you! .. I will be patient as I hope they make a good update.. and I'm sure you will give the good staff an extra push ...I would not like to disappoint you.. but there's almost no chance devs pay more attention to me than to other members...But I will try Link to comment Share on other sites More sharing options...
rfj Posted October 19, 2015 Author Report Share Posted October 19, 2015 But I will try Sounds good enough to me! Link to comment Share on other sites More sharing options...
7twenty Posted October 19, 2015 Report Share Posted October 19, 2015 another time here, scrolling again : https://www.invisionpower.com/features/spamHmmm, that does indeed cause some issues. Link to comment Share on other sites More sharing options...
BugSir007 Posted October 20, 2015 Report Share Posted October 20, 2015 a capture here on the forum 2 minutes agoscrolling initiated the bug, then I closed all tabs and reopened maxthon forum, bug was still there until I totally closed maxthon (no freeze this time, but I sometime have freezes too) another time here, scrolling again : https://www.invisionpower.com/features/spamI can reproduce it each time i go there, passport or not, ABP on or OFF, all extensions disabled, and the site does not work in retro, but it works fine in edgewhat else : I performed a clean install, no extension, no skin, same result. on maxthon forum, I can't find a way to reproduce it, on invision board site maxthon constantly bugs after 15 or 20 seconds while scrollingI'm under the impression that issue is caused by the video contentHi guys,Sorry for the inconvenience.I just conducted a test with v4.4.7.3000 with https://www.invisionpower.com/features/spam but i couldn't repruduce the issue.Since you guys are experiencing the problem , i just asked out team to conduct a thorough investigation about the issue.I hope it gets fixed in the next version. Link to comment Share on other sites More sharing options...
No.1MaxthonFan Posted October 20, 2015 Report Share Posted October 20, 2015 Hi guys,Sorry for the inconvenience.I just conducted a test with v4.4.7.3000 with https://www.invisionpower.com/features/spam but i couldn't repruduce the issue.Since you guys are experiencing the problem , i just asked out team to conduct a thorough investigation about the issue.I hope it gets fixed in the next version.Close the tab and then re-open this thread after visiting the link and you will see what happens. Really messes up scrolling. Windows 10 64-bit build 10525/Windows 10 Mobile build 10512 Link to comment Share on other sites More sharing options...
7twenty Posted October 20, 2015 Report Share Posted October 20, 2015 I just conducted a test with v4.4.7.3000 with https://www.invisionpower.com/features/spam but i couldn't repruduce the issue.Didn't happen the first time to me either. But after trying again things got screwed up. Link to comment Share on other sites More sharing options...
rfj Posted October 20, 2015 Author Report Share Posted October 20, 2015 I got a reply from support:Please open Maxthon installation folder > Modules > Delete MxurlsecI did this -and the first time the browser really acted up! -the windows 'O' stood rolling and Maxthon froze -had to force close it. So I put the folder back, but desided to give it another shot.. and then the 2nd time Maxthon behave!!.. but this invision site still won't work.. though now it seems that just closing the tab does it, not the whole browser.. -and so far Flickr runs normally .. But I have just starting 'testing' with this Module deleted .. Just thought you guys wanted to know if you don't already -and maybe try too ... Link to comment Share on other sites More sharing options...
-ody- Posted October 20, 2015 Report Share Posted October 20, 2015 I got a reply from support:Please open Maxthon installation folder > Modules > Delete Mxurlsec I deleted this folder and .... unfortunately no change on invision site.. the scrolling issue is still there... although just like you noticed, closing the tab seems to do it... Link to comment Share on other sites More sharing options...
7twenty Posted October 20, 2015 Report Share Posted October 20, 2015 That seems like an odd fix? To my knowledge that module is for the checking of URL's entered against a database of known good/bad sites. Might be wrong though, Link to comment Share on other sites More sharing options...
rfj Posted October 21, 2015 Author Report Share Posted October 21, 2015 That seems like an odd fix? To my knowledge that module is for the checking of URL's entered against a database of known good/bad sites. Might be wrong though,Have not helped much either.. I just experienced crash when working on my bank' web page! .. not good ( ..For now then I see no other solution than use another browser till this is fixed .. I will check often though and hope for a soon update..!.. Link to comment Share on other sites More sharing options...
7twenty Posted October 21, 2015 Report Share Posted October 21, 2015 Can you go through the troubleshooting thread and see if anything there helps with the situation. It may lead you to something, or maybe not.But for crashes to happen so often it's certainly not normal.Still haven't had a chance to check out what's happening on that innovision site. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.