[Maxthon PC 7.3.1.3200 beta]

28 minutes ago, Magdalene said:

What User Agent are you using?

 

Was using some of the custom ones posted on the thread here in the forum, now returned it to Maxthon default and it seems to work.

[Maxthon PC 7.3.1.3200 beta]

1 minute ago, suphamster said:

Are you using AdGuard? For me if it enabled I can't watch youtube in MX7 new core version (adding to ignore list does nothing, AdGuard should be disabled at its settings inside app). Any other browser or old core MX7 works fine!

I am using AdBlock. But it has been like that for many years. And since last night nothing visible changed to cause this.

[Maxthon PC 7.3.1.3200 beta]

All of a sudden something strange started happening. I play a video in youtube and it starts, but after few secconds stops, and gives me an error. See the attached video.
I was using the .3000 version, updated to .3200 and nothing changed. Last night it was working normaly. Tried disabling Adblock, or even loged out of my account and used the Guest one. NO difference.

[Maxthon PC 7.3.1.2000]

Hi BugSir009,
No I did an update. 
But last night did the same on my home pc and it went well. So this morning I start my pc at work and it opened with the problem, but suddenly fixed istself (after opening and closing several new tabs). So maybe it was some sync issue, or something else (not sure what). Anyway it is fine now. And which is better, the settings are like on my other PC, previously they were different (I use different size monitors at work and at home), maybe it was some syncing problem yesterday which is gone today. So consider problem solved, not sure why or how, but it is fixed.

[Maxthon PC 7.3.1.2000]

51 minutes ago, Mhzayer said:

Have you tried to delete local state file 
BUT
backup the file first 
Backup your full user data folder in case

Which file was that? I will try it tomorrow as it was on my work pc. On my home pc I don't dare try it, untill it is clear what this happened.

[Maxthon PC 7.3.1.2000]

Just autoupdated to 7.3.1.2000 and now Quickacess is set to 11 item per row, no background immage and 70% maximal width. But the worst is, that it doesn't remember when I change these settings. Upon next launch of Maxthon they are returned to those values, regardless what I set. 
Also tried to go back to 7.3.1.1900 and the problem still remains.

Tried restoring QuickAccess from an older backup but that also doesn't change anything.

[Mx6 questions and discussions]

2 hours ago, BugSir009 said:

Hi SirNasso, the engineer has helped to restore your passwords. Kindly sync again to check. Thanks

Hi BugSir009,
Looks good for now. Thank you.

[Mx6 questions and discussions]

2 hours ago, BugSir009 said:

Hi SirNasso, could you provide me with your Maxthon account ID? I will get the engineer to help to do a check at the backend.

Hi BugSir009,
Mi nickname is SirNasso, or for login I use: atanas_ganeff@hotmail.com. If there is some other ID, just tell me where to find it.

[Mx6 questions and discussions]

13 hours ago, BugSir009 said:

Hi SirNasso, could you try out this issue using the latest 1700 version?

Hi BugSir009,
Just installed the 1700 beta and the problem remains. 1-2 days ago I have also tried the 1700 portable and there was no change.
Now I also notice that the passwords started missing on my mobile too. And it looks like all my passwords, before this issue appeared, are gone. Only the ones I saved after that are present.

[Mx6 questions and discussions]

On 3/1/2023 at 10:02 AM, Mhzayer said:

It doesn't hurt to try

Tried that too. Even in portable the situation is the same. The usernames are there, but the passwords are gone. Only the ones I saved after this started happening are in place, all the others are missing.

[Mx6 questions and discussions]

16 minutes ago, Mhzayer said:

Have you tried using the portable version?

No. But having the same problem on 3 separate devices, using totaly different networks, and different Maxthon versions, shows enough. Atleast I think so.

[Mx6 questions and discussions]

6 hours ago, BugSir009 said:

Hi SirNasso, did you do a clean install or it was overwritten? Try doing a clean install and disable all extensions and let me know if it works.

Did a clean install, disabled all exentensions, and nothing changed. Still no passwords. 
I tried relogging in some sites, and Passkeeper asked to update the stored passwords. So something is lost/not syncing correctly, I think.

edit: Now, strangely enough, some passwords are starting to dissappear from my mobile too. The usernames are there, only the passwords are missing.
edit2: Just got home from work. Maxthon on my homePC is behaving the same way. Passwords missing. Also when I click to check for new version, I get: "Update failed, please try again later." Is it possible there is some issue on the servers?

[Mx6 questions and discussions]

6 minutes ago, BugSir009 said:

Hi SirNasso, did you do a clean install or it was overwritten? Try doing a clean install and disable all extensions and let me know if it works.

I did an upgrade. But as I said, the old 1500 version did the same thing this morning. And nothing is changed on the PC or network. That is why I decided to upgrade to 1602. But it didn't change anything.
Will try a bit later to do a clean install and see if it still behaves this way.

[Mx6 questions and discussions]

34 minutes ago, BugSir009 said:

Hi SirNasso, could it be your office network are blocking certain functions?

No. This network I set-up myself, and there are no blocks of any sort. And yesterday everything was working normaly.

[Mx6 questions and discussions]

Suddenly, this morning, on my office pc, a new problem appeared. I was using .1500 version and autofill passwords doesn't work. I click the username, it appears, but no password is filled. As if the passwords are all gone. In passkeeper, it shows there are passwords saved, but when triyng to view it, the field becomes empty. On my home pc and on my mobile it works normaly. Updated to version 1602, but nothing changed. Tried resyncing, logging out and back in, no change. What could be the issue?
Also if I login to Passkeeper and then close the tab, it stays logged-in. It is not safe that way. Before it required to enter password for it each time I reopen Passkeeper.

[Mx6 questions and discussions]

3 hours ago, Mhzayer said:

what about trying with a guest account not your user account?

As I said, that is what happened with the test version BugSir006 sent me. It was portable, and without any account.

[Mx6 questions and discussions]

13 minutes ago, Mhzayer said:

I recommend to try this issue in the portable version to see if it behaves the same
and you could also try to check it with a guest account to make sure it is not related to your user account data

That is exactly what I did with the version BugSir006 sent me.

[Mx6 questions and discussions]

1 hour ago, BugSir006 said:

Hi SirNasso, could you please try the issues in this test version?

https://drive.google.com/file/d/12Mw2Ns4D366IuoLM1HDmNEo1t_hL3O5X/view?usp=sharing

Hi BugSir006,
Still no change in how it behaves. Absolutely the same.

[Mx6 questions and discussions]

35 minutes ago, BugSir006 said:

Hi SirNasso, do you remember the version number of the browser when this issue happened the first time?

Hi BugSir006,
Not completely sure. But I switched full time to MX6 since some official 6.2 version, maybe around 6.2.0.1000, and it's been like that since then. But can't tell if it's been like that before or not.

[Mx6 questions and discussions]

 

 

This is the video of both problems. As you see other windows are closed without problem, just this one isn't. Hope it helps

[Mx6 questions and discussions]

As for extensions I have only 4 enabled - one 360 Internet protection (from my antivirus), Adblock, Ace script (which might be enabled by default, as I didn't enable it myself) and Google translate. But these were on since the very begging and never seemed to interfere.

[Mx6 questions and discussions]

Also in the same game, there is a window about cookies, that can't be closed. See the attached image. It is in Bulgarian, so you might not understand what is written. But the small window on the top part is not closing upon pressing the X button. On other browsers and older versions of Maxthon it was working fine.

Just now, BugSir006 said:

Hi SirNasso, you mean in version 6.2.0.2500? Did you enable any extensions? Please try to disable the extensions and try this issue again.

Hi BugSir006,
No I'm still with 6.2.0.2400. It didn't auto update, and I still haven't updated it manually. Will try a bit later and let you know if it changes anything. But it was behaving like that quite a few versions back.

[Mx6 questions and discussions]

1 minute ago, BugSir006 said:

Hi SirNasso, please try to force refresh the page or restart the browser to try this issue again. 

Hi 

 

2 minutes ago, BugSir006 said:

Hi SirNasso, please try to force refresh the page or restart the browser to try this issue again. 

Hi BugSir006,
Restarted the browser and still the same. Holding CTRL and trying to drag mark items is not working. It is as if I'm not holding the CTRL key.

[Mx6 questions and discussions]

1 hour ago, BugSir009 said:

Hi SirNasso, could you check your Quick Save Image settings? You could disable that feature so it doesn't interfere with your Ctrl key.

 

Hi BugSir009,
Tried that and it stops the image saving. But now the CTRL key doesn't start the marking. It is like I never press it.

[Mx6 questions and discussions]

Strange new problem. Since the last 2-3 versions, in a Facebook game I try to hold CTRL and drag to mark several items, but instead of selecting them, MX6 saves a copy of the images of the items. Tried disabling shortcuts, boss key and Super-drag-and-drop, but nothing changed. Is there some other option for this, or is this a bug?