7twenty

I'd guess that there's more to it than just copying over a DLL. And for that reason, even if you could do that the chance of it working would be slim to none.

If you're just trying to run an extension that you have downloaded, just doubleclick it and Maxthon will install it. If it's something else, then you will need explain it a little better.

FTR I don't have Open Sans on my system and it works fine. But the whole point of "Open Sans, Arial, sans serif" in the CSS is so it has fallback fonts to use. In my case Open Sans isn't available, so the page is probably using Arial which I do. If that wasn't available it would the default sans serif font. And what's more it's obviously using a font as the rest of the page is rendering properly. I'm not sure it's directly font related as such.

Weird. The following rules block the image if you open it directly (eg. open ixbt.com/branding/gigabyte/gigabyte_main_feb2015.jpg in a new tab) And it shows correctly in the filter log. But for some reason they won't work when on the actual site? ||ixbt.com/branding/gigabyte/gigabyte_main_feb2015.jpg http://www.ixbt.com/branding/*

Hmmm weird, I could swear I already posted in this thread? Works fine here. Webpage font : Default Default encoding : Western ISO-8859-1

laffin_boy replied at 2015-2-7 13:07 @ s_ta_s: Thank you. @BugSir007: See the Adobe Flash & Maxthon thread for details on ensuring Maxthon is using the latest Flash. I'm not 100% on Silverlight. I've never had any issues with it, even after upgrading through multiple versions, but it should be the same except that Maxthon doesn't include it's own version. What shows when you visit http://www.microsoft.com/getsilverlight/get-started/install/default.aspx

I don't think it's all that different to older versions. MX has had issues with the way it displays pages while others are rendered in the background for a long, long time. ABP has probably made it slightly worse. Whatever the cause it needs to be fixed. Let's just add it to the list, shall we?

Another thing. Keyboard shortcuts seem to do different things depending on what it is. Skynote CTRL-G opens and closes Esc does nothing Downloader CTRL-J opens but doesn't close Esc hides to background No way of closing the dialog unless you press the close button on the dialog or close via the taskbar button. Find dialog CTRL-F opens and closes Esc closes Main Menu Alt-F Opens but doesn't close Esc does nothing If it was me i'd have the shortcut work as a toggle like it does using Skynote and Find.

GRC1 replied at 2015-2-4 02:22 Sorry for not responding but had a death in the family. Yes, I have tried everything you asked wit ...I'm sorry for your loss. Yes, I have tried everything you asked with no luck.Just did a test: Extracted and ran a new portable version of MX3 Saved login details on Zillow.com Tested to see if details auto-filled once saved. Worked fine. Extracted a new portable version of MX4 Copied userdata from MX3 to MX4 Ran MX4 and loaded Zillow.com. Login details auto-filled correctly. Trying to save new ones there was also no problem. There was no graphic issues with the page in either version using Ultra or Retro modes. Nor was there any banner about "running an old version". AdHunter/AdBlock was enabled with the default settings. So once again, I don't believe the issue is directly with Maxthon, but more than likely some of your userdata or settings. Until you provide the following then it's almost impossible to state what the issue might be or how to fix it. What version of MX3 are you using (version number & install type eg. installer or portable)? What version of MX4 are you using (version number & install type eg. installer or portable)? What happens when you don't login with your Maxthon Passport account on MX3 & MX4 (if you use one)? Your User Agent settings for both browsers. (Main Menu > Settings > Advanced > user agent section) MX4 not loading your MX3 saved data means either: - Your using installer & portable versions so MX can't find the data; - Somehow your userdata is saved in a different place from default; - If using a Passport account it's not syncing properly; - It has been corrupted. But it all comes back to you providing info so we can pin point where the issue might be. One last thing. Some people wondered why I am using an unsupported version (MX3). That's because everytime I checked for updates I was told I was using the latest version. ByeUpdater has it's own issues, but i'm 100% certain it doesn't update between major versions.

Works fine here as well. I can't actually recall it not working? Make sure you're selecting the correct connection and that is the connection the PC is using.

Are we talking buffering where you see the little spinning loading dots? Or just jumpiness like it's missing a few frames now and then? The skipped frames is something that I brought up ages ago, and seemed to have been fixed then they came back a few releases later. Haven't really noticed it lately though. As far as smooth scrolling, i'm right with you there. I'm not sure if it's the webpages or something else, but sometimes it works nice then a little while later it goes back to jumpy mode. Even at it's best it's still nowhere near as polished as Firefox.

Now you feel like me asking the same thing over and over. The answer to you is no.Except there is a HUGE difference - we can't give you an answer because we don't have the issues you have. On the other hand it's simple for you to provide the information we're requesting. If you're not going to help us and do the tests required, then why should we waste our time trying to figure out your problem? I've linked to the stickied troubleshooting thread , I've asked for some basic info to try determine location of data , I've asked you to check logged out to check if it's a settings issue . Seems very one sided to me. If there was a magic fix for PC issues then there would be a lot of people out of work, unfortunately (or fortunately depending on how you look at it) there isn't and you need to offer some info for people to narrow down the issue. I'm the most patient person you will probably ever deal with, but there is nothing more testing of ones patience than when people ask for help and then ignore or disregard requests and still expect an answer, then complain again that the problem isn't fixed.

Maybe if I repeat this for a 3rd time we might get an answer... On your new/clean installs are you using a Passport account? If so, test with trying the website without signing in and see if you still have issues with it saving.Did you try this? And still no answers to any of the questions to the post above!

GRC1 replied at 2015-2-2 05:10 I am using Ver 3. because as I stated earlier when I installed Ver.4 all my passwords were gone and ... On your new/clean installs are you using a Passport account? If so, test with trying the website without signing in and see if you still have issues with it saving.Did you try this? Run through these troubleshooting steps. because no one can help me to get Maxthon to work.People are trying but you're not being very helpful with some of your answers. You've been told MX3 is old and shouldn't be used, yet you're still complaining that it won't work. That is a lost cause, forget about MX3 and get MX4 working as I and others have shown it works fine. If your passwords are lost, then they also shouldn't be available in MX3. If they're still there then the data isn't being transferred from MX3 to MX4. What version of MX3 are you using (version number & install type eg. installer or portable)? What version of MX4 are you using?

Update to the most recent version and see if it starts working again. http://forum.maxthon.com/thread-13785-1-1.html

YEP... I can read,That may be the case but your instructions are not only somewhat confusing they are wrong. You're discussing Nitro and Maxthon 4, along with NPAPI & PPAPI flash versions. You state to search for pepflashplayer.dll which isn't found nor used with Maxthon 4. You state to rename the NPSWF32_16_0_0_296.dll to pepflashplayer.dll which as far as I know won't work. (EDIT: Just tested and it does work somehow?!) ( try search for the pepflashplayer.dll file in your USB, so you know where to put the update in it )Which won't work as stated above. I'd be interested to know how/if that will even work seeing as you're renaming files to names that aren't even related. (As above seems it does work?!) Then you also state a path to Nitro userdata which isn't relevant to Maxthon 4, and especially not to the portable version. It's great that you want to help users, but if you're going to copy/paste info make sure it's at least somewhat coherent and relevant to a users request. Not only that there is a sticky thread discussing this very matter which clearly shows the correct (most widely acknowledged anyway) method to ensure Flash works with Maxthon. I apologise if that sounds abrupt, but it's just annoying seeing wrong info being provided to users when there is a clear means of doing it properly. So now i'm really lost, what's the point of the PPAPI an NPAPi versions of flash if they're pretty much interchangeable... off to google ..

It's a notification to let you know that whatever it's flashing over has something going on. So if it's on the default browser option, it means that you should select it to make MX the default browser. If it's over resource sniffer there is something available to be downloaded. Nothing to worry about, but I can understand that it's a little disconcerting at times.

Assuming that this is related to flash as you seem to point out - first, check that Maxthon is using the most recent version by going here. If it shows that your version is not up to date, then follow the directions in the Adobe Flash & Maxthon thread. Ensure that you follow them exactly. Also can you advise where exactly you found the info to "rename NPSWF32_16_0_0_296.dll to pepflashplayer.dll". As far as I know, that is NOT related to Maxthon 4 and might be only for Nitro.

No idea what's going on with your install. If you are in fact using MX3, that could be part of the issue. Testing with Zillow.com (i'm guessing that's the site you were referring to) it seems fine as far as I can tell. As shown below, the email address and password saved OK using the save form option in the context menu, and auto-filled correctly (shown by the yellow background). There are no errors that I have seen. Can you take a screenshot of the error in question? On your new/clean installs are you using a Passport account? If so, test with trying the website without signing in and see if you still have issues with it saving.

Reading your post you didn't install the NPAPI (firefox) version. Follow the instructions in the thread you linked exactly as they're written and you should get it working.

gexxy replied at 2015-1-31 08:05 Have you a working email of the developers? thanks Me? No. I have just as much access to the devs as you do, that is post here on the forum.

Unless we're talking about something completely different, I think you're trying to get the Run... Launch in Firefox/Chrome command from the menu working with Maxthon? If that is correct then all you need to do is create a custom shortcut by doing the following: 1. Select the Run... option from the menu. 2. Enter the path to your maxthon executable (eg. C:\Maxthon\Bin\Maxthon.exe) 3. Add the following to the command line - "$(FULL_CURRENT_PATH)" - So you should have C:\Maxthon\Bin\Maxthon.exe "$(FULL_CURRENT_PATH)" 4. Select save, then select the required shortcut keys and type in a name. 5. OK You should then have an extra option in the Run... menu, or you can use the shortcut key to open Maxthon and run the current file in Notepad++. Hope that helps.

Any particular reason you are using NoAds? As Maxthon now comes with AdBlock Plus, I would have thought something like NoAds wouldn't be required. Otherwise hopefully the developer sees this and can offer some insight as to why it isn't working properly. At a guess i'd say that updates to Maxthon since NoAds was released have caused the issue with it.

Merged the thread with an older one. As shown above a reinstall seems to have fixed it for the previous poster. Try that, or updating as mentioned by AdminH.

Oliver One replied at 2015-1-29 19:34 Only if Flash is used, not with HTML5! And it still doesn't detect complete files properly, instead it shows the small segments that Youtube uses to allow variable bitrate. Resource Sniffer needs to be updated to work as Youtube Centre does.