jseeley

Members
 View Profile  See their activity

  • Posts

    53

  • Joined

  • Last visited

 Content Type 

Profiles

Forums

Release Notes

Bug Tracker

Help page

Help page-CN

Release Note5

Rules and recruitment

Release Note6

Posts posted by jseeley

  1. How to change skins on maxthon5

    in Skins

    Posted · Edited by jseeley

    On 10/16/2017 at 3:15 AM, Tony said:

    i think the max width is hard coded - its certainly possible to change settings to reduce the tab width from that set but altering those same settings to a lager number has no effect so i think you are stuck wit what they have as a max

    Thanks so much Tony. I know there's a minimum tab width of 16dip in main\tabbar\container.css but that's the minimum crunch-down width before they start running off the page and start scrolling. Other than that, I haven't noticed anything.

     

    EDIT: If anyone can add any additional info on how to increase the tab width, it will be greatly appreciated. In my opinion, the default tab width is not wide enough. Why make the default tab width so small when there are no or a couple of additional tabs on the tabbar? Waste of space. Most of the website names are so truncated on these tabs, it's hard to make them out.

  2. How to change skins on maxthon5

    in Skins

    Posted · Edited by jseeley

    5 hours ago, SnowLeopard said:

    Maybe (untested) the max tab width parameter skin.ini is overriding the constant.  Try changing both.but don't forget the skin.ini parameter has two values (without and with padding).

    BTW, I left you a PM about how you got Firefox to be one bar (tab+nav bar..  Since then I found the Mozilla Labs "OneLine" addon, but decided not to try it since it's identified by them as experimental, opens up FF and its data, and one comment about how to revert.  Not my cup of tea for now.  Is this what you're using?

     

                                          <<SL>>

    Thanks again for the help. I increased all numbers in @const TAB_MAX_WIDTH: 184dip;(contants.css) and  both sets of maxTabWidth = 220,232 (skin.ini). As a matter of fact, I removed all of these lines from the .css and .ini and there's still no change in tab width. The tab width seems to be specified from somewhere else. 

    In Firefox, I don't think that was me. I have tabs on top and then the nav bar with address bar below that and then I use the fav bar. Thx.

  3. How to change skins on maxthon5

    in Skins

    Posted · Edited by jseeley

    9 hours ago, SnowLeopard said:

    Change this in constants.css in UIMain:

     Tabs */
    @const TAB_MAX_WIDTH: 184dip;

    One shot does it all.

    BTW that width is 1.92 inches on a PC regardless of screen size.resolution.  For me it  may too big.  But determine how wide you want the tabs in inches and multiply by 96 to get width in dip.

                              <<SL>>

    Thanks for the reply. My constants.css in UIMain reads @const TAB_MAX_WIDTH: 184dip; and my tab is about 2.125 inches where it should be 1.92 inches but I'm trying to make it wider. (My firefox tabs are about 3" wide and start shrinking when I have more than 6 tabs across.)

    However, when I change the @const TAB_MAX_WIDTH: 184dip; to say 280dip the tab width is unaffected. Thank you.

     

    EDIT: The TAB_MAX_WIDTH is referenced 3 times in UIMain\main\tabbar\container.css and I also tried changing them each to 280dip from @TAB_MAX_WIDTH but still no effect.

  5. How to change skins on maxthon5

    in Skins

    Posted

    10 minutes ago, SnowLeopard said:

    I think the settings in skin.ini may be outer bounds for tabs.  The actual settings for the tabbar are in UImain/main/tabbar/index.css and for the tabs themselves in UImain/main/tabbar/container.css.  The constants used are in constants.css or skin_c_dark.css.  You can ignore the latter two files and just insert you color choices in container.css or tabbar/index.css directly.

    Hope this gets you started ...

                                   <<SL>>

     

    Thank you. I'm getting there.  I just found, to change the tabbar color:

    UIMain\main\index.css

    background-color: #d1ddef;

     

     

  6. How to change skins on maxthon5

    in Skins

    Posted · Edited by jseeley

    Yes. I stand corrected with the constants.css. I didn't have the default skin selected. After selecting the default blue maxthon skin, I can now change the colors. Thx.  Still looking for a way to make the default tab size larger.

  7. How to change skins on maxthon5

    in Skins

    Posted · Edited by jseeley

    14 hours ago, 7twenty said:

    There's a setting in the skin3.ini file (in UImain.dat) for maxTabWidth = 220,232

    Based on it's name i'd say it will do what you want, but can't be certain. Haven't played around with it.

    And the tab colours can be changed in the constants.css file (or skin_c_dark_const.css if using a dark skin), also in UImain.dat

    @const TAB_ACTIVE_BG:
    @const TAB_BG:

    Set those to whatever colour you want. Again, not tested, but looks to be what you want.

    Thank you so much. I thought I tried these and it had no effect. As a matter of fact, I think I removed the entire constants.css or some of it (can't remember because I tried so many things) and it had very little effect on the colors.  I'll retry these however. Thanks.

     

    EDIT:  If I remember correctly, changing @const TAB_ACTIVE_BG and  @const TAB_BG in the mx4 user.dat did change the colors.  I'll go back and mess around again this evening. Thx

  9. How to change skins on maxthon5

    in Skins

    Posted · Edited by jseeley

    1 hour ago, SnowLeopard said:

    I sympathize (no "empathize") with you.  I've wanted a return of the way *.mxskin files could be loaded in Mx4/  I made some mods to suit my desires.  But my inclination was to reduce the heights of the tabbar and navbar and the widths of the tabs ... sometimes as little as 3/4' (72 dip compared to the 232px they have by defaault).

    I've been told that making it so that *.mxskin (full skin not theme) can be loaded.  But a new core is higher priority at present.  After that the devs may work on implementing skin loading.  I hope they follow through on their discussions.  We shall see.

                                       <<SL>>

     

    Thanks. It was easy to manipulate the mx3 and mx4 user.dat but now I'm lost. It doesn't help that I was away from maxthon for a while. I managed to adjust a few things like removing the 'x' from the active tab, spreading-out the items on the fav bar, and removing the black window border. I made the text and favicons on the inactive tabs full opacity, and enlarged the text on both the tabs and address bar.  But changing the colors of the tabbar and active/inactive tabs and toolbar are a mystery as well as making the default tab wider.

  10. How to change skins on maxthon5

    in Skins

    Posted · Edited by jseeley

    You can change the skin by clicking the t-shirt icon in the tab bar, but it only changes the overall color. I wish there was a way to change seperate elements of the browser. I've spent hours trying to get a dark (near black) tab bar with a near white active tab and tool bar with SLIGHTLY darker (from near white) inactive tabs. Nothing crazing. Simple but seems like an impossibility.

    Right now, with the default MX5 skin, there's hardly no visual separation in the inactive tabs and the text in the inactive tabs are way too light. Also, the tabs aren't wide enough in my opinion. They should be another .25" to .375" wider.

  12. AdBlock in 4.4.4.2000 causing my homepage to refresh twice.

    in Archived General Discussion

    Posted

    I guess I was correct in the first place. When AdBlock Plus is not enabled, the double refreshing no longer occurs on your homepage. If ABP is enabled, your homepage will get the annoying double load. That is whether you have your homepage filtered or not. Also, websites that I filtered with AdHunter no longer work correctly with ABP with those same filters. This version seems to have a lot of bugs.

  16. AdBlock in 4.4.4.2000 causing my homepage to refresh twice.

    in Archived General Discussion

    Posted

    I have a filter set for my homepage. When I start maxthon 4.4.4.2000, why is this filtered hompage refreshing again after it loads completely. I also notice the the Adblock plus takes a few secs to load. When I launch MX 4.4.4.2000, the Adblock plus shows an off status then after a few seconds, enables itself. Is this why my homepage is refreshing itself again?? My fiilters where working wonderfully before maxthon intergrated AdBlock. is there a way to disable AdBlock and go back to AdHunter? Thanks.

  17. Adhunter's rules to block all ads on Youtube 2014. I hope you like it.

    in Extensions

    Posted

    With the installation of 4.4.4.2000, I'm seeing a lot of youtube videos not loading at all. Here is my current filter set for youtube:

    *googlesyndication*

    *.2mdn.net

    *&ad_preroll=1*

    *rmktPingThreshold=0*

    https://s.ytimg.com/yts/swfbin/*/iv_module.swf

    *.*doubleclick.net/*

    *watch_as3.swf*$domain=youtube.com

    https://*.*.fwmrm.net/ad/*

    ###video-masthead-iframe

    ##iframe#video-masthead-iframe

    https://s.ytimg.com/yts/jsbin/www-feather-ads-*.js

    ! Removes all annotations in videos

    https://www.youtube.com/annotations_invideo*

    http://www.youtube.com/annotations_invideo*

    ||youtube.com/annotations_invideo?$object-subrequest

    ! HTML5 version

    youtube.com##.video-annotations

    Thank you for your help. Youtube videos were working great (but loading slow) before this MX update. Now some (presuming the ones with ads) are not loading at all. Thanks so much.

  20. Adhunter's rules to block all ads on Youtube 2014. I hope you like it.

    in Extensions

    Posted

    Hello, 17125798.... Basically I WAS seeing ads appear in the bottom center of the video and I would have to "X" them out. But I just added:

    ! HTML5 version

    youtube.com##.video-annotations

    TO:

    ! Removes all annotations in videos

    https://www.youtube.com/annotations_invideo*

    http://www.youtube.com/annotations_invideo*

    ||youtube.com/annotations_invideo?$object-subrequest

    And I don't see them anymore!.. So thank you, 17125798!

    I still see the yellow areas in the scrubber section, but the annotated ads do not appear any more. THANKS!